An automated gate is a great convenience in your home. It can be opened and closed using a remote; therefore, you don't have to leave your car to operate it manually. What's more, the automatic function comes with security features that deter burglars from trying to bump or manipulate the locking mechanism. However, to enjoy the benefits of the gate, you need to maintain it. Failure to do so can cause the fixture to develop mechanical or electrical problems that will lead to poor performance. In this light, the following are some of the warning signs that your automated gate requires inspection and repairs from a door expert.
Your gate has electrical components and devices, including the sensor that receives a frequency from your remote. If one of the power components malfunctions, it may start producing an annoying beeping sound. You have to inspect the electrical parts to make sure that they are in good working condition. However, since you may not be an expert in this, it is a great idea to consult with a professional.
Before you get the gate's electrical parts checked, inspect the battery used to power the sensor or keypad. If the battery is low on power, it could also produce beeping sounds. Try replacing the battery, and check whether the beeping noise will go away.
Poor sensor response
An automated gate relies on the sensor to open and close automatically. If the gate isn't opening and closing as expected, the sensor could be experiencing problems. It may be broken, faulty or experiencing frequency interference from other radio devices in the area. Start by replacing the batteries to ensure that they are still active. If this does not solve the problem, you may have to replace the sensor to restore the operations of the gate.
Is your gate running off its tracks as you open and close it? A gate that is not tracking properly can eventually fail to open or close when you operate it. What's more, it can come off the tracks entirely and lose stability. This problem can occur if the tracks are worn and damaged or if the rollers lack adequate lubrication. Inspect them and check whether there is any visible sign of damage. Also, apply some lube on the moving parts. If this does not solve the problem, you need to repair the tracks.
Contact a specialist at a company like Auto Gate Centre for regular maintenance of your automated gate. Do not try DIY repairs on electrical parts, as you could end up causing more damage.